COMMERCIAL METAL ROOFING SPECIALISTS

Commercial Metal Roofing In Fort Worth, Texas

Standing seam and metal panel systems built to last 40 years or more.

Aerial view of a commercial building with a black standing seam metal roof, surrounded by industrial structures and parked vehicles in Fort Worth, Texas.

Standing Seam And Metal Panel Installs

Texcore installs structural and architectural standing seam systems along with exposed-fastener metal panels on commercial and industrial buildings across Fort Worth. Panels are factory-formed from Galvalume or coated steel and installed by in-house crews trained on low-slope and steep-slope applications. Every penetration, ridge, eave, and transition is detailed to manufacturer spec and photo-documented before sign-off.

Aerial view of a commercial building with a durable metal roof, showcasing HVAC units and surrounding parking lot, emphasizing Texcore Construction's expertise in metal roofing solutions.

Metal Roof Recovers And Replacements

New metal panels can often be installed directly over existing metal or low-slope systems, eliminating tear-off costs and avoiding the IECC R-30 insulation code trigger. Texcore scans for moisture and inspects the structural deck before recommending a recover or full replacement. Full tear-offs are available when the substrate or code requires it.

Aerial view of a large commercial warehouse featuring a metal roof system, surrounded by residential and industrial areas in Fort Worth, Texas, showcasing Texcore Construction's expertise in metal roofing installations.

Coating And Restoration Systems

Silicone and acrylic elastomeric coatings restore aging metal roofs without panel replacement. Rust spots are treated, seam fasteners are re-torqued or replaced, and laps are reinforced before coating. A properly applied restoration system adds 15 to 20 years of service life at a fraction of new-panel cost.

Aerial view of a commercial building with a metal roof in Fort Worth, showcasing urban surroundings and nearby streets, highlighting Texcore Construction's metal roofing services.

Same-Day Metal Roof Leak Repairs

In-house crews respond same day for active metal roof leaks across Fort Worth. Thermal imaging locates seam failures, fastener pullouts, and panel splits before patching. Temporary dry-ins are performed when weather prevents a permanent repair.

Why Fort Worth Businesses Choose Commercial Metal Roofing

No commercial roofing system outlasts metal. Standing seam and metal panel systems routinely reach 40 to 60 years with minimal maintenance, and they handle everything DFW throws at them — summer heat, spring hail, severe wind, and rapid temperature swings — without the membrane fatigue that shortens single-ply life. Metal’s low maintenance profile and near-zero tear-off waste make it the long-term choice for warehouse owners, industrial facilities, and commercial property investors who plan to hold the building for decades. Texcore installs metal roofing systems that are manufacturer-certified, photo-documented, and backed by a five-year labor warranty.

Get a Free Quote

Climate-Resilient Commercial Metal Roofing for Long-Term ROI

Metal roofing is the highest-longevity commercial roofing investment available for Fort Worth property owners. Standing seam systems with concealed fasteners eliminate the exposed-fastener leak points that cause most metal roof failures, and the floating clip attachment allows panels to expand and contract through Texas temperature swings without buckling or pulling seams apart. Texcore installs Galvalume and Kynar-coated steel panels on warehouses, distribution centers, manufacturing facilities, retail buildings, and multi-tenant commercial properties across North Texas. We handle structural and architectural standing seam, R-panel and PBR exposed-fastener systems, and custom low-slope metal assemblies for buildings where a single-ply membrane is not the right long-term answer. Every project is backed by our five-year labor warranty plus the manufacturer coverage that comes with Fabral, McElroy, and MBCI systems.

Learn More

METAL ROOFING SERVICES

Complete Commercial Metal Roofing Services For Fort Worth

Texcore handles every stage of a commercial metal roof, from initial structural assessment through long-term maintenance. Our Fort Worth crews install new metal systems, recover aging roofs with metal panels, and restore existing metal installations across industrial, warehouse, and commercial properties across North Texas. Every service includes photo documentation, code-compliant detailing, and our five-year labor warranty.

NEW METAL INSTALLS

Standing seam and exposed-fastener metal panels installed by in-house crews. Galvalume and Kynar-coated steel systems available for low-slope and steep-slope commercial applications. Every eave, ridge, curb, and penetration detailed to manufacturer spec.

METAL RECOVERS

New metal panels installed over existing sound roofing systems, avoiding tear-off disposal costs and R-30 code triggers. Texcore runs moisture scans and structural deck inspections before recommending a recover versus full replacement.

LEAK REPAIRS AND RECOATS

Same-day response for active metal roof leaks. Seam failures, fastener pullouts, and rust-through are repaired or replaced. Silicone and acrylic coatings restore aging metal surfaces and extend service life 15 to 20 years.

Testimonials

What Fort Worth Clients Say About Texcore Construction

Talk To Fort Worth’s Commercial Metal Roofing Team

Same-day metal roof inspections available across Fort Worth and surrounding North Texas cities.

Schedule an Inspection

Commercial Metal Roofing Questions Fort Worth Property Owners Ask

A properly installed commercial metal roof in Fort Worth typically lasts 40 to 60 years. Standing seam systems with concealed fasteners and Kynar paint coatings reach the higher end of that range, while exposed-fastener R-panel and PBR systems typically run 25 to 40 years depending on maintenance. The biggest longevity factors are panel gauge, coating quality, and how well penetrations and seams are detailed at installation. Texcore inspects fastener condition and seam integrity annually to catch issues before they become interior leaks.

Standing seam systems use concealed clips that allow panels to float through thermal expansion, with raised seams that keep fasteners and water away from each other entirely. Exposed-fastener systems like R-panel and PBR are faster and less expensive to install but use screws that penetrate the panel face, which are the most common long-term leak point on metal roofs. For Fort Worth commercial buildings where longevity and watertight performance matter most, Texcore typically recommends standing seam. Exposed-fastener systems are the right call for agricultural, industrial, or budget-driven applications.

In many cases yes. A metal recover installs new panels over an existing metal or low-slope system, avoiding tear-off disposal costs and the IECC R-30 insulation code trigger that applies when you strip a roof down to the deck. Texcore runs moisture scans and inspects the structural deck before recommending a recover, because new panels over wet insulation or a failing deck will fail regardless of how well the metal is installed. Building code limits most structures to two roof systems total, so we verify the layer count before quoting.

Heavier panel gauges handle hail significantly better than lighter ones. Texcore typically specs 24-gauge steel for Fort Worth commercial buildings, which resists denting from most hail events that would damage thinner panels. Standing seam geometry also helps — the raised seams act as impact buffers across the panel field. That said, golf-ball-sized or larger hail can dent any metal panel, and post-storm inspections are recommended to document coating damage before it leads to rust. Many metal roofing systems are available with FM Global hail ratings for insurance-sensitive properties.

Metal costs more upfront than TPO or EPDM but delivers a significantly longer service life, often two to three times longer. When you run lifetime cost comparisons over a 40-year building cycle, metal frequently wins. Metal also requires no torch, adhesive, or seam welding during installation, which simplifies quality control. The tradeoff is that metal requires experienced crews to detail penetrations and transitions correctly — poor metal installs leak at curbs, skylights, and pipe boots just like any other system. Texcore will quote TPO and metal side by side for any building where both are viable options.

Inspect twice yearly and after major storms. Check exposed fasteners for backing out or washer deterioration, clear debris from valleys and gutters, look for rust at scratches or cut edges, and verify that sealants at penetrations and transitions are intact. Texcore offers commercial metal roof maintenance programs with photo-documented inspections and preventive fastener re-torquing, which extends service life and is often required to keep manufacturer finish warranties valid. Silicone recoats every 15 to 20 years add another protective layer and restore reflectivity on aging panels.

FREE INSPECTION

Get A Commercial Metal Roofing Quote

Contact us

Need Roofing Services?

Call Our Fort Worth Team

(940) 229-1940

Book Same-day Roof Repair